Application solution of adhesive tape in electronic industry
The more challenging ele...
在传统的模切排废选料中,一般选用离型膜、离型纸或者保护膜。
模切的过程中要用的各种托底排废的保护膜,其保护膜的硬度、硬度、粘度会直接影响到产品的制程精度。
Details >>
一、 Poor specification and size (the size required by the basic drawing)
1. The specif...
模切是用模切刀根据产品设计要求的图样组合成模切版,在压力作用下,将印刷品或其它板状坯料轧切成所需形状的成型工艺。压痕是利用压线刀或压线模,通过压力在板料上压出线痕,或利用滚线轮在板料上滚出线痕,...
Details >>Analysis of PET protective film
At present, most of the pet protection film is made of acryli...
扫一扫添加微信好友